■ Simple rotate ROM setting design provides fast and easy ROM setting.
■ Flexion limit of 0° to 120° and extension limit of 0° to 90°.
■ Quick lock design provides immediate knee flexion fixed at 0°, 15°, 30° and 45°.
■ The brace length is extendable from 17”to 28”.
■ Flexible hinge wings allow custom fit to the leg and provide great stabilization.
■ Plush soft-foam wrap for maximum comfort.
■ Hook and loop closures that adjust for the most
SIZE
Thigh Circumference Length
ONE SIZE
UP TO 27 inch UP TO 70 cm 19 inch-27 inch 48 cm-70 cm
Calf Circumference
UP TO 19 inch UP TO 48 cm
Product Instructions:
❶Adjust the hinge bars length to fit patient's need. The normal length is from 22.5 to 27 inches (Fig.A).❷The top and bottom pans of the hinge bars can be taken down (Fig.B) when necessary and the shortest length can be up to 17 inches (Fig.C).❸After removing the top and bottom parts of the hinge bars, the straps have to be through back to the next support shieId (Fig.D).❹Push the button to enable hinge bar length adjustment (Fig.E).
❺Unfasten all the straps. Locate the hinges on two sides of the knee and make sure the ROM mechanisms aiign with the center of the knee joint (Fig.F).❻ Secure the four straps to comfortable tightness. in sequence of (1) - (4) as instructed in.(Secure the two straps that are closer to the knee first. The sequential numbers are printed on the straps) (Fig.G).❼If the strap is too long. you can trim the straps to secure fit. Remove the hook piece at the end of the strap trim the strap and reapply the hook piece (Fig.H).HOW TO SET THE ROM MECHANISM:
❽Make sure the Q-Lock (Quick-Lock) above the ROM mechanism is unlocked before setting range of motion (ROM)(Fig.I).❾Rotate the grey knob of the ROM mechanism and make the arrow on it pointing to unlock symbol (Fig.J).❿Turn the yellow and white buttons to the desired extension and flexion settings (Fig.K) Rotate the grey knob button and make the arrow pointing to lock symbol (Fig.L).
⓫Switch down the Q-Lock to be quickly locked into the lock position at 0°, 15°,30°,and 45° of flexion (Fig.M). Make the black arrow on the ROM mechanism pointing to the white degree symbols and then switch down the Q-Lock to be locked bilaterally(Fig.N).
⓬lf the stabilization of the brace is not sufficient. the spare straps can be through into the holes of upper middle and lower middle shields of the brace to increase the stabilization.
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without
consulting physician.
3.While wearing the brace. make sure the ROM mechanism buttons are secured and locked to avoid loss of desired range of setting due to unintended touching or crashing.
4.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners cannot be
fastened well. stop using the product to prevent injuries.
Washing Instructions:
Remove foam liner from hinges for hand wash. using a mild detergent and cold water. air dry. Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
■ COOLMAX® fabric lining keeps you cool and comfortable.
■ Open patella to stabilize kneecap.
■ Two spirals stay for great stability and support.
■ Hook and loop closures that adjust for the most comfortable and easy fit.
SIZE
Knee Circumference
( Measurements are taken 6”(15cm) above mid-patella )
S / M
13 inch - 19 inch 33 cm - 48 cm
L / XL
17 inch - 23 inch 43 cm - 58 cm
COOLMAX® fabric Line SPORT KNEE STABILIZER is indicated for mild to moderate patella instability and compression.
❶Open all of the straps. Center patella opening on the kneecap (Fig. A).❷Wrap the upper, lower and middle straps (Fig. B).
❸Secure the hook and loop closures until desired level of support is achieved (Fig. C).
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without consulting physician.
3.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners cannot be fastened well. stop using the product to prevent injuries.
Washing Instructions:
Remove foam liner from hinges for hand wash. using a mild detergent and cold water. air dry. Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
■ Mild to severe ACL and/ or PLC, MCL and LCL instabilities.
Features
■ Anatomic Frame allows the brace to conform to the leg's shape and provide
good support to the patient.
■ Aircraft grade aluminum frame made by 6061 aluminum alloy, provides extra
strength and durability.
■ Light weight and user-friendly smooth edge for comfort and prevents unnecessary
scratch and injury.
■ Tool-free, easy to use Conwell's patented ROM hinge makes it easy and fast to
set range of motion, tool-free.
■ High density foam and soft foam lining for excellent immobilization and comfort.
■ Easy adjustable and removable straps ensure a custom fit.
SIZE
(Measurements are taken (Measurements are taken (Knee width
6”(15cm) above mid-patella) 6”(15cm) below mid-patella)
S
15.5 inch - 18 inch / 12.25 inch - 13.75 inch / 3.5 inch - 4.0 inch
M
18 inch - 20.5 inch / 13.25 inch - 14.75 inch / 4.0 inch - 4.5 inch
L
20.5 inch - 23 inch / 14.25 inch - 15.75 inch / 4.5 inch - 5.0 inch
XL
23.5 inch - 25 inch / 15.25 inch - 16.75 inch / 5.0 inch- 5.5 inch
❶The fastening end of the strap is designed to be removable for the length adjustment purpose. If the strap is too long, remove the hook piece, trim the strap and reapply the hook piece (Fig. A).❷Adjust the foam pads on the straps to suitable position for comfortable wearing. If the foam pad is too long, trim the unwanted part along the groove (Fig. B).❸There are two options for the thickness of the Oval-shaped pads. Choose the required thickness for proper support. ❹For the first time wearing, place the brace to the knee joint and make bilateral ROM mechanisms align with the center of the knee joint. (Fig C). Align the relative positions of ROM mechanisms and knee joint by adjusting anterior straps ①、②. (Refer to the arrow instructions on the straps ) Fasten straps ①、②. (Fig. D). After the alignment is done, for the following wearing, it is not required to unfasten these two straps.
❺ Secure the four posterior straps in sequence of (1)-(4) (Refer to the arrow instructions on the straps) as instructed in (Fig.E Posterior Straps). Press the upper and lower part of the brace while tightening up the straps to provide better fit.ROM setting instruction:
❺For ROM ( range of motion ) setting, take off the Flexion / Extension stops fix cap by gently unlocking the cap from the bottom using the fingers(Fig. F).❻Select the correct Flexion and Extension stops, place them into the notches according to the FLEX/EXT marks on the hinge,“F” stops in “FLEX” notch, “E ”stops in “EXT” notch. For easier application, place the shorter Flexion / Extension stop before the longer Flexion / Extension stop. Take out the longer stop before the shorter one(Fig. G).❼Re-place the Flexion / Extension stops fix cap (Fig. H)., place the cap on the hinge accordingly to FLEX / EXT marks. Make sure the bolts on the cap are well fixed to the holes, then have the ends of the cap well locked to the hinge (Fig. I).❽There are two extension buffer stops with 15°and 25°. Those extra buffer stops are designed to help relieve pain and discomfort by slowing down knee extension movement and avoid knee shock feel near full knee extension. Bigger extension range buffer stop (25°) or smaller extension range buffer stop (15°) can be selected according to individual requirement(Fig. J).
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without consulting physician.
3.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners cannot be fastened well. stop using the product to prevent injuries.
Washing Instructions:
Remove foam liner from hinges for hand wash, using a mild detergent and cold water, air dry. Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
■ Mild to severe ACL and/ or PLC, MCL and LCL instabilities.
Features:
■ Anatomic Frame allows the brace to conform to the leg's shape and provide
good support to the patient.
■ Aircraft grade aluminum frame made by 6061 aluminum alloy, provides extra
strength and durability.
■ Light weight and user-friendly smooth edge for comfort and prevents unnecessary
scratch and injury.
■ Tool-free, easy to use Conwell's patented ROM hinge makes it easy and fast to
set range of motion, tool-free.
■ High density foam and soft foam lining for excellent immobilization and comfort.
■ Easy adjustable and removable straps ensure a custom fit. Size ：S . M . L . XL ( RIGHT )
SIZE
(Measurements are taken (Measurements are taken
6”(15cm) above mid-patella) 6”(15cm) below mid-patella)
S
15.5 inch - 18 inch / 12.25 inch - 13.75 inch / 3.5 inch - 4.0 inch
M
18 inch - 20.5 inch / 13.25 inch - 14.75 inch / 4.0 inch - 4.5 inch
L
20.5 inch - 23 inch / 14.25 inch - 15.75 inch / 4.5 inch - 5.0 inch
XL
23.5 inch - 25 inch / 15.25 inch - 16.75 inch / 5.0 inch - 5.5 inch
❶The fastening end of the strap is designed to be removable for the length adjustment purpose. If the strap is too long, remove the hook piece, trim the strap and reapply the hook piece (Fig.A).
❷Adjust the foam pads on the straps to suitable position for comfortable wearing. If the foam pad is too long, trim the unwanted part along the groove (Fig.B).
❸There are two options for the thickness of the Oval-shaped pads. Choose the required thickness for proper suppor.
❹For the first time wearing, place the brace to the knee joint and make bilateral ROM mechanisms align with the center of the knee joint. (Fig.C). Align the relative positions of ROM mechanisms and knee joint by adjusting anterior straps ①、②. (Refer to the arrow instructions on the straps ) Fasten straps ①、②. (Fig.D). After the alignment is done, for the following wearing, it is not required to unfasten these two straps.
❺ Secure the four posterior straps in sequence of (1)-(4) (Refer to the arrow instructions on the straps) as instructed in (Fig.E Posterior Straps). Press the upper and lower part of the brace while tightening up the straps to provide better fit.
ROM setting instruction:
❺For ROM ( range of motion ) setting, take off the Flexion / Extension stops fix cap by gently unlocking the cap from the bottom using the fingers(Fig. F).
❻Select the correct Flexion and Extension stops, place them into the notches according to the FLEX/EXT marks on the hinge,“F” stops in“FLEX” notch, “E”stops in “EXT” notch. For easier application, place the shorter Flexion / Extension stop before the longer Flexion / Extension stop. Take out the longer stop before the shorter one(Fig. G).
❼Re-place the Flexion / Extension stops fix cap (Fig. H)., place the cap on the hinge accordingly to FLEX / EXT marks. Make sure the bolts on the cap are well fixed to the holes, then have the ends of the cap well locked to the hinge (Fig. I).
❽There are two extension buffer stops with 15°and 25°. Those extra buffer stops are designed to help relieve pain and discomfort by slowing down knee extension movement and avoid knee shock feel near full knee extension. Bigger extension range buffer stop (25°) or smaller extension range buffer stop (15°) can be selected according to individual requirement(Fig. J).
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without consulting physician.
3.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners cannot be fastened well. stop using the product to prevent injuries.
Washing Instructions:
detergent and cold water, air dry.Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
■ COOLMAX® fabric lining keeps you cool and comfortable.
■ Neoprene wrap can be easily applied to swollen or injured knee.
■ Hook and loop closures that adjust for the most comfortable and easy fit
SIZE
Knee Circumference Knee Circumference (Measure Around Knee Joint) (Measure are taken6"(15cm)
ONE SIZE
UP TO 21 3/4 inch
UP TO 55 cm
UP TO 27 1/2 inch
UP TO 70 cm
EXTRA SIZE
UP TO 24 inch
UP TO 61 cm
UP TO 31 1/2 inch
UP TO 80 cm
COOLMAX® fabric Line KNEE SUPPORT is indicated for mild to moderate patella instability and compression.
❶ Open all of the straps. Center patella opening on the kneecap (Fig. A).
❷ Wrap the upper, lower and middle straped (Fig .B).
❸ Secure the hook and loop closures until desired level of support is achieve.
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without consulting physician.
3.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners cannot be fastened well. stop using the product to prevent injuries.
Washing Instructions:
Remove foam liner from hinges for hand wash. using a mild detergent and cold water. air dry. Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
■ COOLMAX® fabric lining keeps you cool and comfortable.
■ Neoprene wrap can be easily applied to swollen or injured knee.
■ Two spirals stay each side for great stability and support.
■ Hook and loop closures that adjust for the most comfortable and easy fit.
SIZE
Knee Circumference
(Measurements are taken 6”(15cm) above mid-patella)
S
13 inch - 15 inch 33 cm - 38 cm
M
15 inch - 17 inch 38 cm - 43 cm
L
17 inch - 19 inch 43 cm - 48 cm
XL
19 inch - 21 inch 48 cm - 53 cm
XXL
21 inch - 23 inch 53 cm - 58 cm
XXXL
23 inch - 26 inch 58 cm - 66 cm
COOLMAX® fabric Line KNEE STABILIZER is indicated for mild to moderate patella instability and compression.
❶ Open all straps. Slide the support over foot (Fig. A).
❷ Pull the support up to the leg and over the knee (Fig. B).
❸ Center patella opening on the kneecap with the metal stays positioned on each side of the kneecap (Fig. C).
❹ Wrap and secure the main straps to desired tightness (Fig. D).
❺ Wrap upper and lower straps, thread through the buckles and secure the hook and loop closures until desired level of support is achieved (Fig. E).
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without consulting physician.
3.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners cannot be fastened well. stop using the product to prevent injuries.
Washing Instructions:
Remove foam liner from hinges for hand wash. using a mild detergent and cold water. air dry. Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
■ COOLMAX® fabric lining keeps you cool and comfortable.
■ Adjustable straps above and below the knee for added support.
■ Plastic hinges on both sides of the knee enhance the stability.
■ Hook and loop closures that adjust for the most comfortable and easy fit.
■ Full open design for easy application.
SIZE
Knee Circumference
(Measurements are taken 6”(15cm) above mid-patella)
S
13 inch - 15 inch 33 cm - 38 cm
M
15 inch - 17 inch 38 cm - 43 cm
L
17 inch - 19 inch 43 cm - 48 cm
XL
19 inch - 21 inch 48 cm - 53 cm
XXL
21 inch - 23 inch 53 cm - 58 cm
XXXL
23 inch - 26 inch 58 cm - 66 cm
COOLMAX® fabric Line HINGED KNEE BRACE is designed to offer mild support of the medical and lateral ligaments and meniscus.
❶Open all straps.❷Center patella opening on the kneecap with the plastic stays positioned on each side of the kneecap (Fig. A).❸Wrap and secure the main straps to desired tightness (Fig. B).❹Wrap upper and lower straps, thread through the buckle and secure the hook and loop closures until desired level of support is achieved (Fig. C).
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without consulting physician.
3.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners cannot be fastened well. stop using the product to prevent injuries.
Washing Instructions:
1. Remove foam liner from hinges for hand wash. using a mild detergent and cold water. air dry. Do not wash in washing
machine or place in mechanical dryer. Do not bleach nor iron.
2. Removable splints can be pulled out from the products before washing.
■ Control patella tendon movement
■ Provide patella compression
■ Decrease pain symptoms associated with patella tendonitis
Features
■ COOLMAX® fabric lining keeps you cool and comfortable.
■ Extra pad inserted to provide patella compression.
■ Extra strap offers adjustable compression.
■ Hook and loop closures that adjust for the most comfortable and easy fit.
■ One size fits all.
SIZE
Knee Circumference ( Measure Around Knee Joint )
ONE SIZE
UP TO 23 1/2 inch UP TO 60 cm
COOLMAX® fabric Line PATELLA STRAP designs to provide compression and padded support below the patella.
❶ Open main straps and secondary straps.❷ Place gel patella pad under the kneecap (Fig.A) (Fig.B).❸ Wrap and secure main straps to desired tightness (Fig.C).❹ Wrap secondary straps (Fig.D), thread through the buckle and secure the hook and loop closure until desired level of support is achieved (Fig.E).
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without consulting physician.
3.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners cannot be fastened well. stop using the product to prevent injuries.
Washing Instructions:
Remove foam liner from hinges for hand wash. using a mild detergent and cold water. air dry. Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
■ Provide ankle compression
■ Increase ankle stability
■ Reduce swelling
■ Prevent sprains and strains
Features
■ Durable high quality super elastic construction.
■ Heavy-duty extension in 4 ways.
■ Easy pull on application.
Size：S . M . L . XL
SIZE
Ankle Circumference
S
7 inch - 9 inch 18 cm - 23 cm
M
8 inch - 10 inch 21 cm - 25 cm
L
9 inch - 11 1/2 inch 24 cm - 29 cm
XL
11 1/2 inch - 13 inch 29 cm - 33 cm
THE CONWELL ANKLE SUPPORT is indicated for mild sprains and to control edema and pain.
❶Slide the support over foot (Fig. A).
❷Pull up the support and make sure the hole is positioned on the heel (Fig. B).
Caution:
1.If discomfort or pain results, persists or increases, discontinue use and consult a physician.
2.Usage as directed by physician, also operated byprofessional accroding to physician indication. Do not operate without consulting physician.
Washing Instructions:
Remove foam liner from hinges for hand wash. using a mild detergent and cold water. air dry. Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
■ Constructed of dual tension elastic strapping material.
■ Enhance jumping force and thrust.
■ Compression increases circulation and energizes muscles.
■ Reinforcing elastic strap provides extra stabilization and a firm footing.
Size：S . M . L . XL
Size
Ankle Circumference
S
7 inch - 9 inch 18 cm - 23 cm
M
8 inch - 10 inch 21 cm - 25 cm
L
9 inch - 11 1/2 inch 24 cm - 29 cm
XL
11 1/2 inch - 13 inch 29 cm - 33 cm
THE CONWELL ANKLE BRACE WITH STRAP is indicated for mild to moderate ankle sprains and as a preventative wrap.
❶ Slide the support over foot (Fig.A).
❷ Pull up the support and make sure the hole is positioned on the heel (Fig.B).
❸ Wrap the elastic strap and make a across on the top of the foot (Fig.C). Secure the hook and loop closure around the ankle joint (Fig.D).
❹ Depends on the need of each patient, the elastic strap can be removed if not required (Fig.E).
Caution:
1.If discomfort or pain results, persists or increases,discontinue use and consult a physician.
2.Usage as directed by physician, also operated by professional accroding to physician indication. Do not operate without consulting physician.
3.Make sure the hook and loop fasteners are well fastened while wearing the product. If the hook and loop fasteners
cannot be fastened well. stop using the product to prevent injuries.
Washing Instructions:
Remove foam liner from hinges for hand wash. using a mild detergent and cold water. air dry. Do not wash in washing machine or place in mechanical dryer. Do not bleach nor iron.
❶Adjust the hinge bars length to fit patient's need. The normal length is from 22.5 to 27 inches (Fig.A).❷The top and bottom pans of the hinge bars can be taken down (Fig.B) when necessary and the shortest length can be up to 17 inches (Fig.C).❸After removing the top and bottom parts of the hinge bars, the straps have to be through back to the next support shieId (Fig.D).❹Push the button to enable hinge bar length adjustment (Fig.E).
❺Unfasten all the straps. Locate the hinges on two sides of the knee and make sure the ROM mechanisms aiign with the center of the knee joint (Fig.F).❻ Secure the four straps to comfortable tightness. in sequence of (1) - (4) as instructed in.(Secure the two straps that are closer to the knee first. The sequential numbers are printed on the straps) (Fig.G).❼If the strap is too long. you can trim the straps to secure fit. Remove the hook piece at the end of the strap trim the strap and reapply the hook piece (Fig.H).HOW TO SET THE ROM MECHANISM:
❽Make sure the Q-Lock (Quick-Lock) above the ROM mechanism is unlocked before setting range of motion (ROM)(Fig.I).❾Rotate the grey knob of the ROM mechanism and make the arrow on it pointing to unlock symbol (Fig.J).❿Turn the yellow and white buttons to the desired extension and flexion settings (Fig.K) Rotate the grey knob button and make the arrow pointing to lock symbol (Fig.L).
⓫Switch down the Q-Lock to be quickly locked into the lock position at 0°, 15°,30°,and 45° of flexion (Fig.M). Make the black arrow on the ROM mechanism pointing to the white degree symbols and then switch down the Q-Lock to be locked bilaterally(Fig.N).
⓬lf the stabilization of the brace is not sufficient. the spare straps can be through into the holes of upper middle and lower middle shields of the brace to increase the stabilization.
❶Open all of the straps. Center patella opening on the kneecap (Fig. A).❷Wrap the upper, lower and middle straps (Fig. B).
❶The fastening end of the strap is designed to be removable for the length adjustment purpose. If the strap is too long, remove the hook piece, trim the strap and reapply the hook piece (Fig. A).❷Adjust the foam pads on the straps to suitable position for comfortable wearing. If the foam pad is too long, trim the unwanted part along the groove (Fig. B).❸There are two options for the thickness of the Oval-shaped pads. Choose the required thickness for proper support. ❹For the first time wearing, place the brace to the knee joint and make bilateral ROM mechanisms align with the center of the knee joint. (Fig C). Align the relative positions of ROM mechanisms and knee joint by adjusting anterior straps ①、②. (Refer to the arrow instructions on the straps ) Fasten straps ①、②. (Fig. D). After the alignment is done, for the following wearing, it is not required to unfasten these two straps.
❺ Secure the four posterior straps in sequence of (1)-(4) (Refer to the arrow instructions on the straps) as instructed in (Fig.E Posterior Straps). Press the upper and lower part of the brace while tightening up the straps to provide better fit.ROM setting instruction:
❺For ROM ( range of motion ) setting, take off the Flexion / Extension stops fix cap by gently unlocking the cap from the bottom using the fingers(Fig. F).❻Select the correct Flexion and Extension stops, place them into the notches according to the FLEX/EXT marks on the hinge,“F” stops in “FLEX” notch, “E ”stops in “EXT” notch. For easier application, place the shorter Flexion / Extension stop before the longer Flexion / Extension stop. Take out the longer stop before the shorter one(Fig. G).❼Re-place the Flexion / Extension stops fix cap (Fig. H)., place the cap on the hinge accordingly to FLEX / EXT marks. Make sure the bolts on the cap are well fixed to the holes, then have the ends of the cap well locked to the hinge (Fig. I).❽There are two extension buffer stops with 15°and 25°. Those extra buffer stops are designed to help relieve pain and discomfort by slowing down knee extension movement and avoid knee shock feel near full knee extension. Bigger extension range buffer stop (25°) or smaller extension range buffer stop (15°) can be selected according to individual requirement(Fig. J).
❶ Open all of the straps. Center patella opening on the kneecap (Fig. A).
❷ Wrap the upper, lower and middle straped (Fig .B).
❸ Secure the hook and loop closures until desired level of support is achieve.
❶ Open all straps. Slide the support over foot (Fig. A).
❷ Pull the support up to the leg and over the knee (Fig. B).
❸ Center patella opening on the kneecap with the metal stays positioned on each side of the kneecap (Fig. C).
❹ Wrap and secure the main straps to desired tightness (Fig. D).
❺ Wrap upper and lower straps, thread through the buckles and secure the hook and loop closures until desired level of support is achieved (Fig. E).
❶Open all straps.❷Center patella opening on the kneecap with the plastic stays positioned on each side of the kneecap (Fig. A).❸Wrap and secure the main straps to desired tightness (Fig. B).❹Wrap upper and lower straps, thread through the buckle and secure the hook and loop closures until desired level of support is achieved (Fig. C).
❶ Open main straps and secondary straps.❷ Place gel patella pad under the kneecap (Fig.A) (Fig.B).❸ Wrap and secure main straps to desired tightness (Fig.C).❹ Wrap secondary straps (Fig.D), thread through the buckle and secure the hook and loop closure until desired level of support is achieved (Fig.E).
❶Slide the support over foot (Fig. A).
❷Pull up the support and make sure the hole is positioned on the heel (Fig. B).
❶ Slide the support over foot (Fig.A).
❷ Pull up the support and make sure the hole is positioned on the heel (Fig.B).
❸ Wrap the elastic strap and make a across on the top of the foot (Fig.C). Secure the hook and loop closure around the ankle joint (Fig.D).
❹ Depends on the need of each patient, the elastic strap can be removed if not required (Fig.E).
